Pegasus is North America's top Aim/MyChron dealer!
 
 
 
Check us out on Instagram
 
Shop With Confidence - 30 Day Easy Returns - No Need To Call
 
Follow us on facebook
 

Barrel End Clamp for Throttle Cables

Click for a larger picture of Barrel End Clamp for Throttle Cables

This barrel clamp is perfect for connecting two cables, making a loop in the end of a cable, or preventing a cable from pulling through a small hole. Some mechanical fire systems (such as Lifeline and SPA) use a similar clamp to secure the cable to the firing head handles.

The barrel measures 5/16" (8mm) OD x 0.675" (17.5mm) long without the clamp screw. A 5/32" hole through the center of the barrel accepts up to two 1/16" diameter cables, or a single #8 stud (our standard #10 stud is just a little too big). A single 10-32 clamp screw is provided. The barrel is only threaded from one end, but some work with a tap would allow you to add a second clamp screw from the other end if desired. Sold individually.

Note: Clamping directly on a single 1/16" diameter cable will require slight modification to the barrel. Filing down the threaded end of the barrel will provide a tighter fit by allowing the clamp screw to fit farther down in the barrel.

Sold individually. Two are shown in the photo to illustrate the screw and barrel.

Qty
Part No.
Price
Stock Status
1579-110

Condition: New

$3.49
In Stock